CUSTOM MOLDED GEAR
The MIC assembly includes a custom-molded gear or timing pulley designed to your specifications.
ONE PIECE ASSEMBLY
The entire assembly is delivered pre-assembled, so it simply slides onto the shaft. There are no adjustments to make or gaps to set.
The clutch has the ability to drive clockwise or counterclockwise.
PERMANENT MAGNET RETURN
All standard units come with a permanent magnet armature return attached to the inside of the gear. This provides a fast and smooth disengagement of the armature when power is released to the clutch coil.
If needed the armature can incorporate a one-piece spring that eliminates backlash.
Special bushings allow for millions of operating cycles for most applications.
The bore of the clutch is made to fit a D-cut shaft to simplify installation and eliminate the need for set screws.
TWO CLUTCH POWER CONNECTION OPTIONS AVAILABLE
MIC clutches can come complete with a lead wire and a customer's specified terminal or the standard connector built into the clutch coil housing.