Local Phone

(021) 8690 6777

021 8690 6771

021 8690 6770

GSM Celuller

0813 8742 8586

0816 1740 8890

Whats App

0813 8742 8586

Vacuum Pump (Applications of Vacuum) THV Type

Vacuum Pump (Applications of Vacuum) THV Type

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.


Anda juga bisa memesan via telephone. Silakan hubungi sales consultant, Hotline kami di, (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@automationindo.com



The Characteristic of the TRUN-DEAN Blower G


  1. Product improved by raising the intensity in order to prevent cent rotor and axis deviation from external influences.
  2. The air compartment and the side cover of our blower has a flange and groove rim, which can not only strengthen the blower's operational functions but also prevent eccentric phenomenal resulting from the fastening of the stud, which may shorten the life of the blower.
  3. To reduce man-made errors, enhance the precision of the leave wheel, and to promote the blower efficiently, our rotor uses the most advanced one time work process Four-Shaft method.
  4. Unique Design with Quality Components¡GAppropriate clearance between the rotors and the rotors with the casing ensure no direct operational contact, hence no lubrication is necessary. The synchronous gear drive system and the shaft bearings are the only parts which require lubrication. Separate lateral chambers are designed to house these moving parts with proper seals to prevent oil leakage to the main chamber.
  5. Low Noise & Minimal Vibration¡GNoise and vibration reduction are the main emphasis in developing the new series of R o o t s blower. The TRUNDEAN Blower rotor concept was adopted based on its flow characteristics which is very stable and even compared to the 2 lobes type, also coupled with the fact that it shows a considerable reduction of both noise and vibration. The extent of reduction can even allow the smaller unit to operate without the need of a silencer.
  6. Computerized CNC machines are used to produce components and parts of high quality and precision, also saves the user both time and labor during maintenance and replacement.






  • Applications of Vacuum
  • Pressures Applied¡G0 ~ ¡V0.45 kgf/cm² 2 ~ 150HP
  • Special order with specific designs






  • Lower noise¡GPressure pluses are the major noise source in blowers. The Trundean R o o t s blower design can efficiently reduce noise by approximately 5 dB.
  • Lower energy consumption¡GTrundean R o o t s blower are designed to control backflow pressure to the rotor in order to reduce energy consumption.
  • Longer bearing life¡GLess vibration transmitted through the lobe results approximately 20% longer bearing life.




Model No. Intlet Diameter
Max. capactiy
Max. Pressure
(kgf/cm² )
Max. Motor
THV-50 2'' 2.83 ¡V0.4 5
THV-65 2.5'' 4.99 ¡V0.45 7.5
THV-80 3'' 8.85 ¡V0.45 10
THV-100 4'' 13.0 ¡V0.45 15
THV-125 5'' 19.8 ¡V0.45 25
THV-125A 5'' 25.2 ¡V0.45 30
THV-150 6'' 30.0 ¡V0.45 40
THV-150A 6'' 41.0 ¡V0.45 50
THV-200 8'' 42.1 ¡V0.45 50
THV-250 10'' 65.7 ¡V0.45 75
THV-300 12'' 89.3 ¡V0.45 125
THV-300A 12'' 117.8 ¡V0.45 150