Motor Timer H2C
DIN-sized 48 x 48 Motor Timer with Simple Operation for Switching Time Specifications
Three Motor Timers cover the wide time range of 6 s to 30 h with easy operation from the operation panel.
Five time specifications for each model with linked time display.
DIN-standard size of 48 x 48 mm.
Easily check operation with neon lamp.
Models with sockets and models with top wiring are also available.
Certified for UL and CSA safety standards.
Conforms to EN 61812-1 (except models that end with "-F") and CE Marking.
Five time ranges are available for each timer by turning the time range selector every 60 degrees.
Note:Rated time is displayed on the window.
|Rated supply voltage
(motor and clutch)
|24, 48, 100, 110, 115, 120, 200, 220, or 240 VAC (50/60 Hz) (see note)|
|Operating voltage range||85% to 110% of rated supply voltage|
|Power consumption||4.2 VA max. (3.96 W max.)|
|Reset voltage||10% max. of rated supply voltage|
|Reset time||Minimum power-opening time: 0.5 s
Minimum pulse width: 0.5 s
|Control outputs||6 A at 250 VAC, resistive load (cosΦ = 1)|
|Mounting method||Flush mounting (except for H2C-F/-FR models), surface mounting, DIN track mounting|
Note:The front panel of the timer is color coded to identify the following supply voltage classifications:
100 to 120 V: Blue
200 to 240 V: Red
Other classes: Black
|Accuracy of operating time||±0.5% FS max. (±1% max. at 0.2 to 6 s for the time range code B or at 0.5 to 12 s for the time range code C)|
|Setting error||±2% FS max.|
|Reset time||0.5 s max.|
|Influence of voltage||±1% FS max.|
|Influence of temperature||±2% FS max.|
|Insulation resistance||100 MΩ min. (at 500 VDC)|
|Dielectric strength||2,500 VAC, 50/60 Hz for 1 min (between current-carrying and non-current-carrying parts)
2,000 VAC, 50/60 Hz for 1 min (between contact and control circuit and between contacts of different polarities)
1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
|Vibration resistance||Destruction: 10 to 55 Hz with 0.375-mm single amplitude for 1 h each in three directions
Malfunction: 10 to 55 Hz with 0.25-mm single amplitude for 10 min each in three directions
|Shock resistance||Destruction: 1,000 m/s2
Malfunction: 150 m/s2
|Ambient temperature||Operating: -10°C to 50°C
Storage: -25°C to 65°C
|Ambient humidity||Operating: 45% to 85%|
|Life expectancy||Mechanical: 10,000,000 operations min. (under no load at 1,800 operations/h)
Electrical: 200,000 operations min. (3 A at 250 VAC, resistive load at 1,800 operations/h)
|Motor life expectancy||20,000 h|
|Approved standards||UL917, CSA C22.2 No.14.
Conforms to EN61812-1 and IEC60664-1 4 kV/1 (except for H2C-F models).
Output category according to EN60947-5-1 (except for H2C-F models).
|EMC (except for H2C-F
Emission Enclosure: EN55011 Group 1 class A
Emission AC Mains: EN55011 Group 1 class A
Immunity ESD: IEC61000-4-2: 6 kV contact discharge (level 3), 8 kV air discharge (level 3)
Immunity RF-interference from AM Radio Waves: IEC61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Burst: IEC61000-4-4: 2 kV power-line (level 3), 2 kV I/O signal-line (level 4)
Immunity Surge: IEC61000-4-5: 1 kV line to line (level 3), 2 kV line to ground (level 3)
|Case color||Light gray (Munsell 5Y7/1)|
|Degree of protection||IP40 (panel surface)|
|Weight||H2C series: approx. 180 g
H2C-F series: approx. 270 g