XGT Series Ladder programming PLC XGI
XGT Series contain variety of CPU types for customized solution which Support wide coverage from small/middle-to large size-system control.
XGT series is new-concept, new-generation industrial solution based on Open Network, High-speed processing, Compact size, Easy-to-use programming. XGT Series offers useful lineups and various network & special modules so that you can configure optimum system for your industrial purpose and system scale.
- Speed Innovation...Fast
MPU (NGP 1000) developed by LSIS accomplishes the fastest CPU processing speed(0.028㎲ / step). And LSIS-dedicated bus controller and High-speed transmission algorithm achieve high performance of internal interface.
- Size Innovation ... Compact
The smallest size (dimensions 27×98×90) achieves cost-efficiency and various applications.
- Network Innovation ... Flexible
System integration of Open Network: XGT series support various communication solutions ranging from field control to information level with Fast Ethernet, Profibus-DP, DeviceNet, MODBUS and even MECHATROLINK-II.
- Software Innovation ... Intelligent
XG5000 Software Package provides integrated engineering environment from basic programming to different special module setting as well as diagnosis. This package consists of XG5000 (Programming), XG-PD (Network) and XG-PM Software Package (Positioning).
- Engineering & Programming Innovation ... Easy
XGT series expand device memory and support advanced programming environment with Index register (Z), File register (U), and Analog register (U).
XGI-CPUU (IEC Standard)
XGI-CPUH (IEC Standard)
|Operation system||Reiterative operation, fixed cycle operation, constant scan|
|I/O Control system||Scan synchronous batch processing system(refresh system), direct system by command|
|Program language||Ladder Diagram, SFC(Sequential Function Chart), ST(Structured Text), IL(Read only)|
|No. of commands||Operator||18|
|Basic function||136 types + real number operation function|
|Basic function blcok||43|
|Dedicated function block||Dedicated function blocks by special function modules, communication dedicated function block(P2P)|
|Operation processing speed (basic command)||Basic||0.028 ㎲/step|
|Real number operator||± : 0.392㎲(S), 0.924㎲(D)
X : 0.896㎲(S), 2.240㎲(D)
÷ : 0.924㎲(S), 2.254㎲(D)
|Program memory capacity||1Mbyte||512Kbyte|
|Max. I/O memory contact||131,072points|
|Data memory||Symbolic variable area(A)||512KB(max. 256KB retain settable)|
|Direct variable||M||256KB (max. 128KB retain settable)|
|R||64Kbyte * 2block|
|Flash area||2 Mbyte, 32block|
|Timer||No point limit
Time range: 0.001~4,294,967.295 second
|Counter||No point limit
Coefficient range: 64 bit expression
|Program structure||Total no. of programs||256|
|Fixed cycle task||32|
|Internal device task||32|
|Operation mode||RUN, STOP, DEBUG|
|Restart mode||Cold, Warm|
|Self diagnosis||Operation delay monitoring, memory fault,
I/O fault, battery fault, power fault and etc
|Built-in function||Modbus slave, PID|
|Download port||RS-232C(1CH), USB(1CH)|
|Data protection in case of power failure||Retain area setting by basic parameters|
|Max. base extension||8|