Home   »   Produk   »   Dispensing Valves   »   Positive Displacement Valves
 
 

VDP150 Positive Displacement Valve

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone. Silakan hubungi sales consultant, Hotline kami di, (021) 8690 6777 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@automationindo.com

The VDP150 positive displacement valve was developed for dispensing small shots of low and medium viscosity materials. The double-acting metering system provides accurate shot sizes of 0.005cc to 0.15cc.

The VDP150 is designed for use with the VC-1195A Valve Controller.

Features

    • Designed for low to medium viscosity materials
    • Dispenses accurate micro-shots of 0.005 to 0.015cc
    • Stroke adjustment feature provides accurate shot size control
    • Suck-Back feature eliminates post-dispense "dripping"


Models
VDP150     Positive Displacement Valve
VC-1195A     Valve Controller 110V
VCE-1195A     Valve Controller 220V CE

Specifications
Operating Air Pressure:     60-90 PSI
Material delivery pressure:     Spring wire diameter : ø0.3mm - Max 0.3kgf/cm2

Spring wire diameter : ø0.5mm - Max 1.2kgf/cm2
Cycle Rate:     120cycles/min (full stroke)
Minimum Shot Size:     0.005cc
Maximum Shot Size:     0.15cc/cycle
Measuring Type:     Plunger
Weight:     320g
Driving part materials:     Cylinder Body, CAP : AL Hard Anodizing (BLACK)
Piston: SUS303
Check Body: SUS303, RULON
Wetted part materials:     Chamber: SUS303
Plunger: SUS420(Tin Coating)
CAP, CV Body: SUS303
Check Valve: PEEK
O-Ring: Perfluore
Connecting Ports:     Operating Air Input: M5xP0.8 ø4 Urethane Hose
Material Inlet: BSPT1/8"
Material Outlet: Luer Lock (male)